Loaf Magnet with adaptor accessory is applied for the production of precast modular components, with plywood or wooden shuttering forms. It's designed with no button, compared to standard switchable push/pull button magnet. It's quite slim and make less occupation of the steel table.
It simplies the formwork mould installation and just need to locate the
shuttering magnet into the exact position by hands. Normally if there is a slight wrong position, you can use a rubber hammer to fix it. The further step is to install the adaptor accessory and adjust the tensile bar to fit your wooden mould height and make it support tightly. The bottom
magnetic system could afford powerful resistance force against the forms moving under the circumstance of pouring concrete and steel platform vibrating, due to the integrated neodymium magnets. After works done, a special release bar is provided to release it and remove it for further maintain or next use. The stainless case feature soutstanding performance for anti-rust, which greatly increase the magnets using life.
MAGNET DIMENSION
| Type |
L(mm) |
W(top) |
W(bottom) |
H(mm) |
N.W.(KG) |
Force(KG) |
| LF-350 |
125 |
54 |
45 |
35 |
1.2 |
350 |
| LF-900 |
250 |
54 |
45 |
35 |
2.3 |
900 |
In the processing of this magnet house, we make 100% size inspection with GO/NO GO gauge to make sure it fits your current adaptor. After magnet assembling and grinding, the inspection will be done again before shipment.
