Plywood panel is always popular in the concrete precasting process, as a forming side rail, with a smooth and wear resistant phenolic film. With the purpose of fixing the plywood/timber formwork on the steel table firmly when concrete pouring, this
magnetic side rail system is developed and produced to achieve this goal quickly and efficiently.
It's composed of several pieces standard box magnets with clamping adaptors and a steel side rail. In the begainning of moulding process, it's easy to nail the steel framwork to the plywood form manually and then move it to the accurate position. Lately screw the adapting bracket to the two sides of magnets and hange them onto the steel side frames. Finally, push the magnet knob down and the magnets would hold on the steel bed firmly, because of super power integrated permanent magnets. In this case, the whole process of plywood frames and magnetic side rails are prepared for the further concreting.
DIMENSION SHEET
| Model |
L(mm) |
W(mm) |
H(mm) |
Magnet Force(kg) |
Coating |
| P-98 |
2980 |
178 |
98 |
3 x 1800/2100KG Magnets |
Nature or Galvanized |
| P-148 |
2980 |
178 |
148 |
3 x 1800/2100KG Magnets |
Nature or Galvanized |
| P-198 |
2980 |
178 |
198 |
3 x 1800/2100KG Magnets |
Nature or Galvanized |
| P-248 |
2980 |
178 |
248 |
3 x 1800/2100KG Magnets |
Nature or Galvanized |
Meiko Magnetics is thrilled to design and manufacture varities of
magnetic shuttering system and formwork solutions for fixing plywood forms quickly and easily, due to our 15 years participating experiences on magnetic solutions for precast concrete industry.
